What are the most common lug nut socket sizes?

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size are lug nut sockets?

The 5 Piece lug nut socket set includes 3/4, 7/8, 13/16, 1, and 1 1/16″, 1/2″ drive sockets for use on the most popular standard lug nuts.

Can I use a regular socket for lug nuts?

Your socket set is likely standard and the lug nuts are metric, or vice versa. Get the right size socket or you will round off all the lug nuts and have to buy new ones, or worse, have to pay a shop to remove them.

How do I know my lug nut size?

Check the thread size for a lug nut. Refer to the vehicle owner’s manual for thread dimensions; measure the width of threads on the lug bolt with measuring tape, or bring the nut to a hardware store and twist it around the thread pitch gauge or compare it to loose bolts with marked sizes.

What size bolt fits a 13mm socket?

Size Chart
Bolt size Size Tolerance
12mm 12.30
5/16″UNF 1/2″ 13.00
M8 13mm 13.30
1/4“BSW 13.64

Is 6 point or 12 point socket better?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

Can I use a ratchet to remove lug nuts?

A ratchet is a common wrench device with a fastener component. A ratchet wrench is an essential tool that is used to fasten or loosen nuts and bolts.

Can you use a regular wrench instead of a socket wrench?

Wrenches perform the same function as ratchets and sockets — tightening and loosening fasteners — but there are differences and situations that call for one over the other. … A wrench with an open end fits around a fastener instead of over it, so you can slip it into an area where there isn’t room for a socket.

Can I use a 12 point socket on a 6 point nut?

A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener. Your tool will work best when it fits precisely onto the fastener.

What is a 12pt socket?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

What are 8 point sockets used for?

Will a 12 point socket work on a Torx bolt?

A 10 mm 12 point socket will not slip over the star and a 12 point 11 mm socket spins and will not grab. The special star bolt needs a star socket. Another way to explain it is that the head of the bolt is shaped like a 12 pointed TORX wrench.

What are 5 point sockets used for?

All purpose impact sockets are for use with impact power tools in loosening and tightening fasteners. They can apply more torque than a hand drive tool and have an enclosed head that fits around and grips the entire head of the fastener so the socket won’t slip off.

Are impact sockets different than regular sockets?

The wall of an impact socket is around 50% thicker than that of a regular hand tool socket, making it suitable for use with pneumatic impact tools, whereas regular sockets should only be used on hand tools.

Can a 12 point socket be used on hex head bolt?

Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut.

What is AE Torx socket?

What is the most common ratchet size?

Common ratchet sizes include 1/4-inch drive, 1/2-inch drive and 3/8-inch drive. Having different socket wrench sizes will allow you to operate different socket sizes based on your particular needs.

Are hex keys the same as Allen keys?

A hex key, also known as an Allen key is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.

Why are 12 point bolts used instead of hex bolts in some applications?

The 12 point design permits greater torque to be applied to the bolt and eliminates the rounding of the hex socket that occurs with standard hex sockets. The flange diameter and head thickness of the 12 Point Flange Bolt are equivalent to the head dimensions of a socket head cap screw.

What is a 12 point box end wrench used for?

A wrench with 12 points is used on either a hexagonal or a square nut; the 8- and 16-point wrenches are used on square members.

Is a Torx the same as an Allen wrench?

But for metric, it’s a perfect match for 2.5 mm. T10 converts perfection over to a 7/64″ hex size. However, it joins the pack of torx wrenches without a metric hex size. Jumping up to T15, it’s basically the same size as 1/8″ hex.

Breaking Down Each Torx to Hex Conversion.
Torx Size Allen Wrench Conversion
T40 9/32″
Feb 23, 2019

Why do some technicians use Allen keys to fasten joints?

Why do some technicians use Allen keys instead of self-tapping screws to fasten joint? … To summarize, a hex key is a tool having a hexagonal socket that is used to drive nuts and screws. They are easier to use and less prone to strip than their Phillip’s head equivalent since they have six driving points.

Are Torx and hex the same?

Hexagon keys are also known by several other names including hex key, hex wrench, Allen key, and Allen wrench. Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern.

What can you use instead of Torx?

Originally Answered: What can you use instead of a Torx screwdriver? Sometimes an allen key will work, or even a flat blade screwdriver if it will jam between opposite points in the recess. Either way, be ready to replace the screw and/or the tool used because of damage.

What does a Torx head look like?

A Torx screw head always has a six-pointed lobe, or star, design on the top, never any more points or less. Although a hex screw also has a six-sided indentation on top, it’s an entirely different shape and design, featuring a hexagon or stop-sign shape.