Is it worth it to replace driveway?

If you are planning to sell your home in the near future, replace your driveway instead of making repairs. While you may not get a dollar-for-dollar return-on-investment, a new driveway will add more appeal to your home than a patched or cracked driveway, which could quickly scare off potential buyers.

What is the cheapest way to redo a driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.

How much does it cost to replace driveway concrete?

Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.

Is it cheaper to pave or concrete a driveway?

Cost. Asphalt is generally much cheaper to install than concrete. On average, the cost per square foot for blacktop will be considerably cheaper than concrete. … Even a basic concrete driveway will be more expensive due to the required forms, rebar and construction & curing time.

What is the most cost-effective driveway?

Resin Bound Surfacing: A Cost-Effective Choice

You will expect a driveway that will last up to 30 years, and one that will maintain its good looks for that entire time. People choose resin bound because it offers excellent value for money and needs little or no maintenance.

What type of driveway is best?

Durable Driveway Surface Options
  • Asphalt. The best option to protect your property investment, should provide aesthetic, safety, and lifespan benefits. …
  • Concrete. Among the most durable options on the market is a concrete driveway surface. …
  • Gravel. …
  • Pavers.

Does a concrete driveway increase property value?

At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value. The amount can be more for a larger home.

How long does a cement driveway last?

25 to 30 years
The average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.

What’s better pavement or concrete?

Concrete is more durable than asphalt. Because it is a less flexible material, it breaks in freezing temperatures, and many people turn to concrete patching products. … Though it is more durable overall, when damages do occur, concrete repair is harder and costlier. than asphalt repair.

When should I pave my driveway?

spring
Generally speaking, late spring until early fall is the best time to pave a new asphalt driveway. This may vary depending on the region you live in. It’s best to work with asphalt when air and surface temperatures are 50°F and above. Moreover, firm ground is best for paving with asphalt.

How do you install a driveway?

How cold is too cold to pave a driveway?

During initial application, the asphalt should still be at least 220 to 290-degrees Fahrenheit. If the asphalt dips below approximately 185-degrees Fahrenheit before compaction is complete, its consistency stiffens up too much to finish the job properly.

Can it be too hot to lay asphalt?

Ideally you want to install asphalt when both ground and air temperature are anywhere between 50 and 90 degrees. Anything below 50 or above 90 can cause a poor pour that will give you issues down the road.

How long does it take for asphalt to harden?

Since asphalt needs time to harden and cure, usually 6-12 months, your parking lot or driveway will remain soft and pliable until then. You may walk on the new pavement immediately, but keep automobile traffic off of it for at least 3 full days and longer in hotter temperatures.

How long do you have to stay off a new asphalt driveway?

Normally, 24-hours is all that is required to use your new asphalt surface. In very warm weather, we recommend staying off the fresh asphalt for 1 – 2 days, as the surface cools.

Can asphalt be laid in the rain?

Why Can’t You Pave in the Rain? In general, asphalt cannot be installed when it is raining. This is because asphalt mixtures contain oil and oil and water react when they come into contact, negatively in this case.

How hot is asphalt on a 100 degree day?

On a sunny day, asphalt can quickly heat up, even if the air temperature doesn’t feel super hot to you. For example, if it’s 85 degrees, then the blacktop temperature is 110. If the air temperature is over 100 degrees, then the blacktop can reach 160 degrees.

What should I do with my new asphalt driveway?

Caring For Your New Asphalt Driveway
  1. Do not drive on your new driveway for 3-5 days.
  2. Wait up to 14 days before parking on your new driveway. And when you do, only park on it during the cool part of the day.

Should you water a new asphalt driveway?

Even when cured, asphalt can sometimes soften in extremely hot weather and harden as temperatures fall. To temporarily harden hot asphalt, you can water it down with a garden hose. Do not be alarmed if soapsuds appear. … Large, heavy vehicles can depress your new asphalt and create ruts in your new blacktop.

Why is my new asphalt driveway not smooth?

Not enough compaction

If your asphalt isn’t smooth and there are loose rocks scattered over the surface, or if you can kick loose small bits of asphalt or aggregate, it’s very likely your pavement wasn’t compacted properly.