Which way does the chain go on a chainsaw?

The chain of a chainsaw always rotates in a clockwise direction, regardless of type. So you need to make sure the sharp edges of your blades are also facing that direction. They should be pointing away from the motor or body of the chainsaw when on the top side of the chainsaw.

Is it possible to put a chainsaw chain on backwards?

When replacing the chain on your chainsaw is to make sure that the cutting part of your chain is facing the right direction. Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut.

What is the cutting edge of a chainsaw chain?

The cutter is the part of the saw chain that does the cutting. The saw chain has left- and right-hand cutters so that the saw chain will cut evenly through the wood. The depth gauge (referred to as a raker in some parts of the country) determines the depth of the cut (figure 3–1).

How do you change a chain on a chainsaw?

How loose should chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

How much does a chainsaw chain cost?

● Full Chisel Chain
Chain TypeDrive linksAverage price
Full Chisel Chain45$14
68$19
72$20

How much is a chain for a Stihl chainsaw?

Compare with similar items
This item Stihl Chainsaw Chain– 26RS68- 18 Inch, 68 Drive Links, .325 Pitch, .063 GaugeOregon L68 ControlCut Chainsaw Chain for 18-Inch Bars, Fits Stihl, 68 Drive Links , grey
Customer Rating4.5 out of 5 stars (767)4.7 out of 5 stars (914)
Price$2699$1896
Sold ByTradeAddictsAmazon.com

What chain do I need for my Stihl chainsaw?

Stihl also uses 1 for 1/4-inch pitch chains, none of which appear on its chain chart, as well as 6 and 7 for 3/8-inch and 1/4-inch PICCO chains respectively.

What is the most aggressive chainsaw chain?

The brand Stihl is the most aggressive chainsaw chain brand. Aggressive chains feature long-lasting, high cutting speed, and better blades. The Husqvarna is also a well-known brand for its 18-inch H30-72, 20-inch H80-72, and H4 684 0.050-inch aggressive chainsaw chains.

Will any chain fit a Stihl chainsaw?

Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.

Can I put a bigger bar on my Stihl chainsaw?

Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches.

Can you put a 20 inch bar on a Stihl MS250?

Stihl does not make 3005 mount bars in anything longer than 18″/68DL (. 325″) or 18″/61DL(3/8″P). The 3003 mount bars from the MS260/270/280/290 will not fit on a 250.

Can you put a 18 inch bar on a 14 inch chainsaw?

Chainsaw guide bars range from 12 to over 40 inches long. A Poulan 14 chainsaw can operate with a bar that’s 12, 14, 16 and 18 inches length. However, a larger bar may not always give the best cutting performance.

Can you put a bigger bar on a Stihl MS170 chainsaw?

Yes, that’s an MS250 part number, yes it‘ll fit right into the MS170 & MS180 saws. How big are you thinking? You could probably go up to a 20″ bar with a skip tooth chain as long as you don’t try to work too fast. But that’s a lot of chain for that saw to pull.

Can I put a 18 inch bar on a 16 inch chainsaw?

Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain. However, it is capable of taking anything between 13” and 24”.

Can you put a longer bar on a chainsaw?

Power SizeBar Size (Inches)
Battery: 36-40 Volt12-16
Battery: 56-80 Volt1618

Can you put a 14 inch bar on a Stihl ms170?

241 and 170 will use same bar mount – Stihl 3005 or Oregon A074. So, yes, you can use the same bar on the 170 and 241, so just match it for 170.

Can I put a shorter bar on my chainsaw?

Yes, but you need a bar designed to fit on your saw. But since most saws have longer bars than they really need, it’s hard to go wrong with a shorter one. You’ll get more power and it’s easier to keep the chain out of the dirt and in contact with various obstacles if your bar is shorter.

Is a shorter chainsaw bar better?

ArboristSite Operative

Chain speed, Shorter the bar the higher the chain speed. chain speed is solely based upon rpmhow long the bar is won’t affect chain speed.

Does a shorter chainsaw bar cut faster?

If you are using two different bar lengths that are appropriate for a given saw then the shorter bar will cut only a bit faster due to less friction loss. lighter chain, etc. A short bar length for a saw will generally alloe for a larger drive sprocket.

Can you put a 14 inch bar on a 16 inch chainsaw?

Generally speaking, the higher the power of a chainsaw, the longer the guide bar it can handle. Bar length based on chainsaw power.

Can I put a 16 inch bar on a 14 inch chainsaw?

Engine TypePower RatingCompatible Bars
Gas35 – 45 CC12 – 18 Inches
Gas45 – 60 CC16 – 20 Inches
Plug-in Electric8-12 Amps10 – 16 Inches
Plug-in Electric13-15 Amps14 – 18 Inches
Jan 10, 2020

What size tree can a 14 inch chainsaw cut?

Felling medium trees – 16” to 18”

Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.

Can you drill a hole in a chainsaw bar?

Re: Drilling a Chainsaw Bar

It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.

Can you run a chainsaw without a chain?

Registered. Most chainsaws will run faster without the blades on them since there is no resistance. This will void the warranty and shorten the life of the engine. Be careful not to overrev it.

Should you start chainsaw with chain brake on?

Always start your chainsaw with the chain brake engaged so the chain does not move.