In which method ferric ammonium sulphate is used as an indicator?

Answer. Chemical analysis is the name of the method when ferric ammonium sulphate is used as the indicator. Basically, this method is used in the making of pharma elements. It is used in standardizing the formulation.

How do you make 0.01 M ferric ammonium sulphate?

Preparation and Standardization of 0.1 M Ferrous Ammonium Sulphate
  1. Dissolve 40 g of ferrous ammonium sulfate in a previously cooled mixture of 40 ml of sulphuric acid and 200 ml of water.
  2. Dilute with sufficient freshly boiled and cooled water to produce 1000 ml.
  3. Standardize the solution in the following manner.

How ferric alum is prepared?

Ferric alum uses bauxite as the raw material. The raw material is cooked with sulphuric acid under suitable conditions. The resultant product is sold in liquid form.

How does ferric alum indicator work?

Ferric Alum Indicator is Chemical indicators used as oxidation reduction indicators. Product Description: Ferric Alum Indicator is Chemical indicators used as oxidation reduction indicators. It is used in medicine, chemical analysis and metallurgy.

How standard solution of silver nitrate and ammonium thiocyanate are prepared and standardized?

Ammonium Thiocyanate Solution Standardization

Pipette out 30.0 ml of 0.1 M silver nitrate into a glass-stoppered flask and dilute with 50 ml of water. Add 2 ml of nitric acid and 2 ml of ferric ammonium sulfate solution. Titrate with the ammonium thiocyanate solution to the first appearance of a red-brown color.

Why is nitric acid added when nh4scn solution is standardized against 0.1 N AgNO3 using ferric alum as indicator?

*Concentrated Nitric Acid is added to prevent hydrolysis of the Ferric Ammonium Sulphate which used as indicator. Reagent: 1- Standard 0.1 N Silver Nitrate (AgNO3).

Which type of solution is used in Mohr method?

The chloride ion concentration of the MgCl2 and CaCl2 solutions is determined by a precipitation titration with calibrated silver nitrate solution. This procedure is known as Mohr’s method.

Which indicator is used in Mohr’s method?

In Mohr’s method, chromate ions are used as the indicator.

Which indicator is used in fajans method?

In the Fajans method, named after Kazimierz Fajans, typically dichlorofluorescein is used as an indicator; the end-point is marked by the green suspension turning pink. Prior to the end-point of the titration, chloride ions remain in excess. They adsorb on the AgCl surface, imparting a negative charge to the particles.

What is the advantage of Mohr’s method?

Advantages of Mohr MethodMohr method is simple as it does not consume time as there is no need for more titrations • Uses potassium chromate as the indicator which is easily accessible and affordable • Mohr’s method is a simple, direct and accurate method for chloride determination.

What is Mohr’s method?

This method determines the chloride ion concentration of a solution by titration with silver nitrate. As the silver nitrate solution is slowly added, a precipitate of silver chloride forms. If the solutions are acidic, the gravimetric method or Volhard’s method should be used.

Which indicator is used in Volhard’s method?

In the Volhard method a standard solution of thiocyanate ion (SCN) is titrated against Ag+ using Fe3+ as the indicator.

Which indicator is not used for weak base and strong acid titration?

(ii) Weak acid Vs strong base: Phenolphthalein. (iii) Strong acid Vs weak base: Methyl red and methyl orange. (iv) Weak acid vs. weak base: No suitable indicator can be used for such a titration.